Outdoor/Indoor Mid-Backrest Seats For Fixed Bleachers Steps YY-MS-P

Short Description:

Our fixed bleachers seating can be installed on the concerte step directly, there are three different installation methods, first  for sureface installation ,second for side installation ,third for vertical installation our stadium seating material for HDPE/PP ,the processing technic for blow molding which lone use time ,low maintenance and  a great visitor experience.

 


Product Detail

Product Tags

Product Name: Plastic folding chair

Durable Type Fixed Bleachers Seating - YY-MS-P
YY-MS-P

Specification: back height 360 mm, seat width 430 mm, seat depth 406 mm

face view

Figure 1: side view 2: face view

face view

Figure 3: side view 4: face view

 

face view

Figure 5: side view 6: face view

 

Mode: lie flat, wall mounted  and floor mounted

Applicable products: steel structure stands, fixed stands.

Material and Material description

seat using high density polyethylene (HDPE) as raw material, hollow blow molding; seat color selected professional coloring masterbatch.

Durable Type Fixed Bleachers Seating - YY-MS-P c
Durable Type Fixed Bleachers Seating - YY-MS-P b
Durable Type Fixed Bleachers Seating - YY-MS-P

Material characteristics

1.Polyethylene (HDPE) is imported raw plastic from Saudi Arabia BN; Model 5502

2.Anti-aging agent is a special outdoor anti-aging agent imported from Switzerland;

3.The use of high quality color mother coloring can ensure that the product will not fade for many years, durable and non-corrosive raw materials have good waterproof and impact resistance, good mechanical strength and chemical stability, and good weathering resistance (heat resistance and cold resistance).

ms stadium seating (1)

Product process and process description

hollow blow molding process, hollow blow molding is the most commonly used plastic processing method in thin shell hollow products, chemical industry and packaging. Hollow blow molding is the extrusion from the extruder, still in the softening state of the tubular thermoplastic blank into the molding mold, and then into the compressed air, the use of air pressure to make the blank along the mold cavity deformation, Thus blowing into a short neck hollow products.

Hollow blow molding has been widely used to produce a variety of thin shell hollow products, chemical and daily packaging containers, as well as children's toys.Hollow blow molding (also known as blow molding) is a method of blowing and forming hollow products by means of gas pressure. It is the most commonly used plastic processing method and a fast developing plastic forming method. The mould used for blow molding is only negative mould (concave mould). Compared with injection molding, the equipment cost is lower, the adaptability is stronger, the molding performance is good (such as low stress), and the products with complex undulating curve (shape) can be formed.

1.Circular pipe material description: the material is Q235, the material has moderate carbon content, good comprehensive performance, strong strength, plasticity and weldability. Hot dip on the surface can effectively increase the beauty and corrosion resistance of the product.

2.Fastener material description: material for Q235, surface hot dip zinc or powder spray treatment. Can effectively increase the beauty and corrosion resistance of the product

3.Support foot material introduction: material for aluminum alloy profile. The material has the advantages of low density, high strength, good conductivity, good corrosion resistance and easy processing.

4.Application of Blocking Material: Polymers made of vinyl are non-crystalline materials commonly known as PVC. materials The material is non-flammable, high strength, weather resistance and excellent geometric stability. And PVC have strong resistance to oxidants, reductants and strong acids.

Places of use

stadiums, schools, multi-function halls, etc.

FAQ

1.How long will your mold development take?

About 25 days

2.Do you charge mold fees? How much is it? Can I return it? How to return it?

We have production capacity. As long as you provide molds, we support generation production and processing. The minimum order quantity is 600, so we need to charge a certain mold fee for new molds. The cost can be determined according to the situation of each project. If both parties reach cooperation in the later stage, they can return the mold cost. The return method can be negotiated.


  • Previous:
  • Next:

  •